There are a large number of repeater stations on both 2m and 70cm bands. This is a small selection of repeaters in our local area. Some of which are maintained by club members.<\/p>\n
GB3SB – Selkirk
\nOutput Frequency: 145.650 MHz
\nInput Frequency: 145.050 Mhz (-600 kHz)
\nLocation: Selkirk IO85ON
\nCTCSS: 118.8Hz
\nMax Deviation: 2.5kHz<\/p>\n
GB3DU – Duns
\nOutput Frequency: 145.7625 MHz
\nInput Frequency: 145.1625 MHz (-600 kHz)
\nLocation: Duns IO85SS
\nCTCSS: 118.8Hz (Use tone squelch to filter out DMR traffic on analogue sets)
\nMax Deviation: 2.5kHz
\nMULTIMODE: FM and DMR (not networked).
\nDMR: Colour Code 1.
\nUse Talkgroup 9 on Timeslot 1 for calling, switch to TG9 on timeslot 2 for longer QSOs.<\/p>\n
GB3HK – Selkirk
\nOutput Frequency: 433.050 MHz
\nInput Frequency: 434.650 MHz (+1.6 MHz)
\nLocation: Selkirk IO85ON
\nCTCSS: 118.8Hz<\/p>\n
GB3BT – Berwick upon Tweed
\nOutput Frequency: 145.700 MHz
\nInput Frequency: 145.100 MHz (-600 kHz)
\nLocation: Berwick IO85WT
\nCTCSS: 118.8Hz<\/p>\n
GB3BE – Duns
\nOutput Frequency: 430.8625 MHz
\nInput Frequency: 438.4625 MHz (+7.6 MHz)
\nLocation: Duns IO85SS
\nAccess: 1750Hz Burst
\nMax Deviation: 5kHz<\/p>\n
GB3LB – Lauder
\nOutput Frequency: 145.7875 MHz
\nInput Frequency: 145.1875 MHz (-600 kHz)
\nLocation: Lauder IO85NS
\nAccess: CTCSS
\nCTCSS: 118.8Hz Input for access, 118.8Hz on Output.
\nMax Deviation: 2.5kHz<\/p>\n","protected":false},"excerpt":{"rendered":"
Local Repeaters There are a large number of repeater stations on both 2m and 70cm bands. This is a small selection of repeaters in our local area. Some of which are maintained by club members. GB3SB – Selkirk Output Frequency: …<\/p>\n